Country/region and language selection

Nibbler

TruTool N 500

REQUEST OFFER

Nibbler

TruTool N 500

For cuts across edges and welding seams.

REQUEST OFFER

Powerful in four directions

The TruTool N 500 offers unique versatility. Since you can cut in four directions, even backwards, you can dismantle tanks and containers, and process coils and workpieces with bends of up to 90°. The machine is also well-suited to cutting high-tensile materials. The optimal weight/performance ratio of 8.8 lbs. against a sheet thickness of 0.2 in. is particularly impressive.

4 cutting directions

The machine can be turned through 360° in 4 steps of 90°.

Rectangular punch with flexibility for profiles

Ideal for work in hard-to-reach areas, for cuts across edges and weld seams.

Minimal force required

You work without feed force and, therefore, required force is reduced to a minimum.

Variable speed

The speed controller can be used to adjust the working speed to suit the specific cutting task.

Nibblers: Applications video

TruTool N 500, dimensional drawing

4 cutting directions

With the TruTool N 500, you can even cut in reverse. Since you can pull the tool toward you horizontally, it is ideal for relief cuts. You can also move the nibbler vertically downward for tank dismantling. All of this is achieved with minimal force and no emissions.

Variable speed

The speed control is highly efficient for work with scribed lines or with a template. It is also a very suitable choice for frequent processing of radii and stainless steel. You can adapt the working speed to the cutting task and the electronic overload protection offers yet another notable benefit. It has a protective effect on the motor.

Perfect for processing stainless steel

The TruTool N 500 is well-suited to cutting high-tensile materials. Specifically designed punches and dies ensure perfect cuts.

Flat sheet

For cutting straight sheets and trimming them to length. For notches, as well as radial and interior cutouts.

Profiles

For cutting profiles, cuts across edges and weld seams, as well as for dismantling tanks and containers.

Coil processing

For cutting coils. For relief cuts and sampling.

The following consumables and the corresponding accessories are included in the scope of delivery.

Tube of grease "G1", 0.88 oz

1 unit 0344969

Die 5 (integrated)

1 unit 1884930

Punch 5/P5 (integrated)

1 unit 2260199

Allen key DIN 911-4

1 unit 0067849

TruTool N 500 handle

1 unit 0974659

TRUMPF Box M3

1 unit 1770951

Find the right consumables and accessories for your machine here.

Punch guide

1 unit 1884928

Set of 2 1264364

Die No. 5

For sheet thicknesses up to 0.2 in. in mild steel. Profile sheets up to 0.12 in.

Set of 2 1264132

1 unit 1884930

Die P5

Particularly well-suited to profile sheets 0.12 - 0.2 in.

1 unit 1884929

Set of 2 1264150

Die No. 2

For sheet thicknesses up to 0.08 in. in mild steel and stainless steel

1 unit 1884952

Set of 2 1264189

Die No. 3

For sheet thicknesses up to 0.125 in. in mild steel and stainless steel. Profile sheets up to 0.08 in.

1 unit 1884951

Set of 2 1264172

Set P5

2 x punch 5 / P5 and 1 x die P5

Set of 1 1453369

Punch 2 / 3

For flat sheets up to 0.125 in. and profile sheets up to 0.08 in.

1 unit 2260198

Set of 2 1453366

Set of 5 1453367

Punch 5 / P5

For profile sheets 0.12 - 0.2 in.

1 unit 2260199

Set of 5 1453365

Set

2 x punch 5 / P5 and 1 x die No. 5

Set of 1 1453368

Punching and nibbling oil for aluminum

1000 ml 0125874

Punching and nibbling oil for steel

500 ml 0103387

TRUMPF Box M3

1 unit 1770951

Chip bag

To collect chips

1 unit 0103557

Suspension eyelet

1 unit 0097208

	TruTool N 500
Maximum sheet thicknesses
Maximum sheet thickness, steel 400 N/mm²	5 mm
Maximum sheet thickness, steel 600 N/mm²	3.2 mm
Maximum sheet thickness, steel 800 N/mm²	2.5 mm
Maximum sheet thickness, aluminium up to 250 N/mm²	7 mm
Radii
Smallest radius	90 mm
General
Working speed (max.)	1.5 m/min
Starting hole diameter	41 mm
Nominal power consumption	1700 W
Dimensions
Length	381 mm
Height	235 mm
Weight
Weight	3.8 kg

PDF <1MB

Technical data sheet

The technical data of all product versions as a download.

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

You may also find these topics interesting

Mechanical engineering and system construction

Whether it's sheet metal design, repair work, or dismantling work, TRUMPF's machines and tools are used throughout the life cycle of machinery and systems.