Selectare țară/regiune și limbă

Exhibits

Machine tools and laser systems - that's what we do. To ensure that you remain competitive and productive, we are constantly driving forward the development of our machines. See our customized solutions for your production for yourself.

Pioneering 2D laser cutting in the long term

Would a 2D laser machine that can also handle 50-degree bevel angles be a game changer in your production? Or are you looking for a system with the best price-performance ratio that pays off even with low capacity utilization? Whatever you are looking for, you will find the best conditions with us.

TruLaser 1030 Lean Edition: price-performance in laser cutting

This world premiere masters its job and meets all budget requirements. With 6 kW, it cuts everything up to 25 mm. Get started straight away: operation is intuitive and cutting data is already integrated.

Aflați mai multe

TruLaser 3040 Bevel Cut Edition: when bevel is just right

This flatbed machine cuts up to 50° bevel angles and is economical from as little as 5% bevel cutting. At the same time, it saves up to 80 % in time and work steps.

Aflați mai multe

TruLaser 5030 with SortLine / SortMaster Station / SortMaster Vision: sorting runs on autopilot

Experience autonomous laser cutting and sorting at the next level. This world premiere separates parts from the scrap skeleton and then sorts them perfectly. The highlight: all without programming.

The best time for bending

Whether you are looking for a top model in bending or a machine that bends your job economically: At EuroBLECH, you will find exactly the right bending solution from TRUMPF. Simply follow the signs at the stand that say “Bend automatically here” and “Click here for the top model in bending”. Machines with an attractive investment, with mobile automation for unmanned production or with on-demand servo drive for maximum productivity await you.

TruBend 1150: Does its job. Affordably.

For repeatable and precise bending, the TruBend 1150 is worthwhile even with low capacity utilization. You can create bending programs quickly and directly on the machine.

Aflați mai multe

TruBend 7050 with Flex Cell: It bends automatically here

With Flex Cell, the fastest mobile bending cell from TRUMPF, you are ready to bend quickly - and finish even faster. Flexibly automated, you can produce small parts, in particular, simply and economically on just 10 m².

Aflați mai multe

TruBend 5170 and ToolMaster: Top model in bending

With this version of the productive all-round machine, you can bend at maximum performance. Its on-demand servo drive makes it fast and economical, while the ToolMaster handles the changeover fully automatically.

Aflați mai multe

Look Beyond - our solutions and services

It is crucial for the success of sheet metal production that your system works reliably around the clock. The true added value of our products unfolds through the interaction of our various solutions and services. Beyond the world of machines, we offer a world of solutions that is unique and provides two central value propositions.

Always up and running

With a TRUMPF machine, you are choosing more than just first-class technology. You are choosing the highest availability on the market. Whether it's our service app, our online updates for your machine or condition monitoring including machine diagnostics: we are always at your side. So that the machine runs and runs and runs.

Aflați mai multe

Maximize performance

Rely on expertise that goes deeper than the largest trade fair stand. No matter where you are and what you plan to do next: With us, you will find the best conditions for this. Whether parts optimization, e-shop, new bending tools, software solutions or smart factory consulting: With us as your solution partner, you can maximize your performance. So that performance increases and increases and increases.

Aflați mai multe

Welding & cutting

Easy to operate with low operating costs: We simplify your welding and cutting process with clever solutions. Whether you want to get into automated welding or are thinking about a low-cost start in flexible laser processing: At TRUMPF at EuroBLECH you will find the best conditions for your next step towards success.

TruArc Weld 1000: A specialist. Always available.

With TruArc Weld, you can easily get started with automated welding. You can create a program in just 60 seconds. Then set the starting point and start welding thanks to Smart Seam Tracking.

Aflați mai multe

TruLaser Cell 5030: Sharp cut. Precisely connected.

According to the motto “Sharp cut. Precisely connected”, you can use this machine to cut and weld components in 2D and 3D as well as pipes with 4kW. Simple and economical, even for small quantities. It is ideal for frequent component changes.

Aflați mai multe

Our customers are convinced

"Nu numai maşinile de înaltă calitate şi rapide sunt importante pentru procese de producţie eficiente. Tot ceea ce le menţine în funcţiune ar trebui să funcţioneze cât mai simplu şi cât mai rapid posibil în munca de zi cu zi. Posibilităţile pe care ni le oferă aici serviciul digitalizat de la TRUMPF nu pot fi estimate în bani."

Matthias Wittsack

Manager de producție pentru prelucrări mecanice la Rauch Landmaschinenfabrik GmbH

Automatizarea și digitalizarea sunt subiecte importante pentru noi. Soluțiile de la TRUMPF m-au convins.

Raphael Willgenss

Specialist în digitalizare în cadrul grupului HEUN

Îmbinările sudate sunt perfecte și pot fi reproduse în orice moment la aceeași calitate.

Matthias Winkler

Director al SANO Transportgeräte GmbH

"TruLaser Cell 5030 garantează companiei TRUMPF un viitor strălucit."

Alan Peterson

Directorul grupului 3-Dimensional Services

"De ce am încheiat un parteneriat cu TRUMPF? Deoarece conlucrăm ca o adevărată familie. Avem grijă de nevoile celorlalți și colaborăm pentru a obține o generație inovatoare de produse pentru clienții noștri."

Mike Baranowski

Director responsabil cu calitatea (Quality Director) al grupului 3-Dimensional Services

Accesul mobil la toate informațiile privind fluxul de material ușurează viața de zi cu zi a tuturor angajaților.

Tim Ungerer

Șef management de produs tehnologie pentru tablă, MERZ GmbH

Primim imediat sugestii pentru așa-numitele ghiduri tehnice, care explică mesajele de eroare și oferă ajutor pentru auto-asistență. În acest fel, personalul nostru de întreținere a reușit să rezolve 80 la sută din toate problemele, fără a fi nevoie de un tehnician.

Matthias Wittsack

Manager de producție pentru prelucrări mecanice la Rauch Landmaschinenfabrik GmbH

Experience our power tools in hall 11 at booth D57

Experience the complete product range of our power tools live. You can test the machines yourself and see the benefits for yourself. For example, our machines from the edge shaper range, as well as machines for cutting sheet metal or cleaning support strips.

TruTool TSC 200: The powerful tool against hard slag

Our brand new slat cleaner is the perfect solution for laser cutting machines with high laser power and correspondingly hard slag. The newly developed cleaning process is based on a rotating 2-stage cleaning and ensures impressive results. In addition, an innovative electronic box informs the operator of maintenance intervals.

Aflați mai multe

TruTool PS 100: Simply remove parts from the scrap skeleton

With our part separator, we are presenting another tool that makes work easier for users of laser cutting machines. With the TruTool PS 100, small parts that are connected to micro- or nanojoints can be easily and incredibly quickly removed from the scrap skeleton. And up to 10 times faster compared to manual sorting.

Aflați mai multe

TruTool TKA: Impressive surface quality

Our edge milling cutters are used wherever visible edges are created, cutting burrs are cleanly removed or chamfers are required for subsequent powder coating or painting. They can be used to produce chamfer lengths of up to 15 mm. The result: a uniform and oxide-free chamfer quality with high corrosion protection.

Aflați mai multe

Revenire la privirea de ansamblu