Close Scrutiny

From the point of view of a machine, human beings are really quite remarkable things. They have no problem sketching a line on a piece of paper, working completely freehand. Humans can also hold an egg in their hand without crushing it, and then peel it for good measure.

And they seem to have no trouble at all in sharpening a stick and using it to roast marshmallows over a fire without burning them! We humans can tackle these tasks because we have sensors that monitor and adjust our movements based on real-time feedback – in other words, our senses. So wouldn’t it be great if machines had senses, too?

Then we would finally be free from the hassle of having to program every coordinate path, teach every sequence of operations, and painstakingly slice open and inspect weld seams. We could simply trust our machines to do a great job. Wouldn’t that be something ? Well, in fact, it’s already happening!

Machines are already acquiring these kinds of senses in their own particular way. When laser marking first emerged, machine operators had to use an ultra-precise clamping fixture to get the markings in exactly the right place. After all, how could a marking laser be expected to find the right spot?

All it could do was aim blindly at the point where two coordinates met and hit whatever happened to be there. But today’s marking lasers are different: They have a camera eye that allows them to detect what’s in front of them and align the optics to mark exactly the right spot. This development is already transforming the world of manufacturing – and there’s plenty more to come.

There are essentially two types of sensors. Monitoring sensors supply data for quality assurance and documentation purposes, but do not actually intervene in a running process. One popular example is a sensor designed to monitor compliance with specified limit values. If the defined thresholds are exceeded, the machine sounds an alarm and the production manager can immediately check where the problem lies.

Control sensors, on the other hand, measure a value and then intervene in the running process. Depending on the reading, a control sensor might modify the laser power, or adjust the feed rate or focal position. Generally speaking, control sensors are more complex than monitoring sensors.

Laser material-processing machines are particularly easy to equip with sensor technology. The optics are the perfect place to put a sensor, offering a simple connection to the mounting system and allowing the sensor to peer directly into the process. The incorporeal nature of a laser beam means it can only be controlled digitally, so it is very easy to incorporate it in a control loop that includes sensors.

Until just a few years ago, process sensors were the exception rather than the rule. But now they are regarded as an integral part of production in segments such as automotive and medical technology. And it’s not hard to see why: sensors help companies make more money by introducing faster cycle times, better quality, seamless quality control, less scrap, and consistent traceability in the field.

In the realm of automotive-bodywork welding, sensor-based remote welding operates at over twice the speed of welding with filler wire. Cameras detect the position of the part during welding or marking. As a result, the part holder can be made to less demanding specifications, making it cheaper and easier to build.

In welding processes, monitoring sensors provide reliable, seamless quality documentation along the entire length of the seam for each individual part. That gives a greater level of reliability than conducting destructive sample testing in the field, and it means this latter method can often be significantly scaled back or eveneliminated altogether.

Monitoring sensors also deliver instant reports on any faulty welds, in turn allowing production staff to tackle the problem the moment the first part is affected rather than discovering at the end of the shift that hundreds of parts need to be scrapped. Meanwhile, control sensors endeavor to push scrap rates close to zero by making immediate adjustments whenever something goes wrong

Steadily increasing demand for smaller and more precise components is also driving a trend toward greater use of sensor technology. The more complex the part, the more stringent the quality standards for tasks such as welding, and the greater the need for sensors capable of monitoring and controlling the process with a high level of precision. Of course this argument also holds true in reverse, with the power of sensors paving the way for new kinds of part geometries. In the case of remote welding of car-body parts, for example, the decision to shrink flanges became available only once the operator was confident that the seam-position control system would reliably locate the correct position for each and every fillet weld. This newfound confidence has been helping automakers reduce weight, use less material and speed up their production lines ever since.

Slowly but surely, these efforts to bring about machine perception are transforming the appearance and functionality of entire manufacturing systems. Previously, machines worked blind. Engineers had to guide them millimeter by millimeter, painstakingly anticipating every change in speed, component position, or contour. As expectations of component and machining precision have become more demanding, so too has the effort involved in mounting and positioning each part, some-times reaching absurd heights.

And machine frames have become heavier, bulkier and more complex as operators strive to meet the required tolerances in the micrometer range.

Yet the moment a machine establishes contact with its environment, it becomes capable of formulating its own response to each part. Frames can be made narrower and smaller and reduced to the bare essentials, and positioning devices can be made more flexible. Ultimately a new level of tolerance emerges throughout the process, though the results are just as accurate as ever. Laser welding is the perfect example: place a part just about anywhere in the cabin, and the laser will get the job done.

Factory managers have long recognized the importance of data as an integral part of Industry 4.0 – and more is always welcome. This data stems from various sources, with one of the most reliable being the sensors that monitor production processes. At the same time, however, small and medium-sized enterprises are facing something of a dilemma as to what they should actually do with all the data they collect. In response, a pioneering wave of suppliers is already busy developing intelligent services designed to analyze process data. The ultimate goal is to use big-data methods to spot imminent problems in a manufacturing process or to develop an algorithm that – when fed with enough data – can autonomously suggest how to improve a process and even execute the necessary actions itself.

Condition monitoring for individual machines is already well established; the next step is status monitoring for an entire factory, followed by sensor-based production control.

In the meantime, experts are busy working on new sensors and sensor combinations. They are currently pinning their hopes on interferometric sensors, a highly promising development that is currently very much in vogue. This type of sensor uses the interference of light waves to measure a broad range of parameters ranging from weld depth to seam detection. Although interferometers are still an expensive substitute for cameras when it comes to position sensing, their prices are steadily falling, and it won’t be long before the devices become smaller and cheaper.

No one doubts the benefits they offer. Perhaps at the top of the list is their ability to produce three-dimensional images. This is particularly useful when measuring volumes, especially in applications such as laser ablation and laser metal deposition.

The promise of autonomous manufacturing is drawing ever nearer. Small companies, in particular, have long been clamoring for simplified production processes where machine operators can simply place any machinable part anywhere they like in a machine. Using its data-base of CAD drawings, the machine would then identify the part, decide how it should be machined, and execute the necessary welding operations. In principle, there would be nothing else the operator would have to do.

Of course there is still some way to go before this becomes reality – the evolution of autonomous driving would perhaps be an apt comparison – but we are clearly heading in the right direction. One example of a sensor capability that really does seem to be just around the corner is material recognition, a technology that will make processes such as laser marking even simpler. The future certainly looks bright!

The promise of autonomous manufacturing is drawing ever nearer. Small companies, in particular, have long been clamoring for simplified production processes where machine operators can simply place any machinable part anywhere they like in a machine. Using its data-base of CAD drawings, the machine would then identify the part, decide how it should be machined, and execute the necessary welding operations. In principle, there would be nothing else the operator would have to do.

Of course there is still some way to go before this becomes reality – the evolution of autonomous driving would perhaps be an apt comparison – but we are clearly heading in the right direction. One example of a sensor capability that really does seem to be just around the corner is material recognition, a technology that will make processes such as laser marking even simpler. The future certainly looks bright!