국가/지역 및 언어 선택

Exhibits

Machine tools and laser systems - that's what we do. To ensure that you remain competitive and productive, we are constantly driving forward the development of our machines. See our customized solutions for your production for yourself.

Pioneering 2D laser cutting in the long term

Would a 2D laser machine that can also handle 50-degree bevel angles be a game changer in your production? Or are you looking for a system with the best price-performance ratio that pays off even with low capacity utilization? Whatever you are looking for, you will find the best conditions with us.

TruLaser 1030 Lean Edition: price-performance in laser cutting

This world premiere masters its job and meets all budget requirements. With 6 kW, it cuts everything up to 25 mm. Get started straight away: operation is intuitive and cutting data is already integrated.

세부 정보

TruLaser 3040 Bevel Cut Edition: when bevel is just right

This flatbed machine cuts up to 50° bevel angles and is economical from as little as 5% bevel cutting. At the same time, it saves up to 80 % in time and work steps.

세부 정보

TruLaser 5030 with SortLine / SortMaster Station / SortMaster Vision: sorting runs on autopilot

Experience autonomous laser cutting and sorting at the next level. This world premiere separates parts from the scrap skeleton and then sorts them perfectly. The highlight: all without programming.

The best time for bending

Whether you are looking for a top model in bending or a machine that bends your job economically: At EuroBLECH, you will find exactly the right bending solution from TRUMPF. Simply follow the signs at the stand that say “Bend automatically here” and “Click here for the top model in bending”. Machines with an attractive investment, with mobile automation for unmanned production or with on-demand servo drive for maximum productivity await you.

TruBend 1150: Does its job. Affordably.

For repeatable and precise bending, the TruBend 1150 is worthwhile even with low capacity utilization. You can create bending programs quickly and directly on the machine.

세부 정보

TruBend 7050 with Flex Cell: It bends automatically here

With Flex Cell, the fastest mobile bending cell from TRUMPF, you are ready to bend quickly - and finish even faster. Flexibly automated, you can produce small parts, in particular, simply and economically on just 10 m².

세부 정보

TruBend 5170 and ToolMaster: Top model in bending

With this version of the productive all-round machine, you can bend at maximum performance. Its on-demand servo drive makes it fast and economical, while the ToolMaster handles the changeover fully automatically.

세부 정보

Look Beyond - our solutions and services

It is crucial for the success of sheet metal production that your system works reliably around the clock. The true added value of our products unfolds through the interaction of our various solutions and services. Beyond the world of machines, we offer a world of solutions that is unique and provides two central value propositions.

Always up and running

With a TRUMPF machine, you are choosing more than just first-class technology. You are choosing the highest availability on the market. Whether it's our service app, our online updates for your machine or condition monitoring including machine diagnostics: we are always at your side. So that the machine runs and runs and runs.

세부 정보

Maximize performance

Rely on expertise that goes deeper than the largest trade fair stand. No matter where you are and what you plan to do next: With us, you will find the best conditions for this. Whether parts optimization, e-shop, new bending tools, software solutions or smart factory consulting: With us as your solution partner, you can maximize your performance. So that performance increases and increases and increases.

세부 정보

Welding & cutting

Easy to operate with low operating costs: We simplify your welding and cutting process with clever solutions. Whether you want to get into automated welding or are thinking about a low-cost start in flexible laser processing: At TRUMPF at EuroBLECH you will find the best conditions for your next step towards success.

TruArc Weld 1000: A specialist. Always available.

With TruArc Weld, you can easily get started with automated welding. You can create a program in just 60 seconds. Then set the starting point and start welding thanks to Smart Seam Tracking.

세부 정보

TruLaser Cell 5030: Sharp cut. Precisely connected.

According to the motto “Sharp cut. Precisely connected”, you can use this machine to cut and weld components in 2D and 3D as well as pipes with 4kW. Simple and economical, even for small quantities. It is ideal for frequent component changes.

세부 정보

Our customers are convinced

"효율적인 생산 프로세스를 위해서는 고품질의 빠른 기계만 중요한 것이 아닙니다. 생산 프로세스를 실행하는 모든 것도 작업 일상에서 가능한 한 간단하고 빠르게 작동해야 합니다. TRUMPF의 디지털화된 서비스가 우리에게 제공하는 가능성은 금전적으로 비교할 수 없습니다."

Matthias Wittsack

Rauch Landmaschinenfabrik GmbH의 기계 가공 생산관리 책임자

자동화와 디지털화는 우리에게 매우 중요한 주제입니다. TRUMPF에서 제공하는 솔루션에 저희는 매우 만족합니다.

Raphael Willgenss

HEUN 그룹의 디지털화 전문가

용접심은 완벽하게 구현되며 언제든지 동일한 품질로 반복 처리될 수 있습니다.

Matthias Winkler

SANO Transportgeräte GmbH CEO

"TRUMPF는 TruLaser Cell 5030과 함께 긍정적인 미래를 앞두고 있습니다."

앨런 피터슨(Alan Peterson)

3-Dimensional Servies 그룹 CEO

"우리는 왜 TRUMPF와의 파트너쉽을 이어가는가? 그것은 바로 다른 큰 가족과 일하고 싶어 하는 것과 같습니다. 모두가 서로의 필요를 확인하고 다음 세대에 사용될 제품을 함께 생산합니다."

마이크 바라노프스키(Mike Baranowski)

3-Dimensional Services 그룹 품질 관리자

재료 흐름의 모든 정보에 대한 모바일 액세스는 모든 직원의 일상생활을 더욱 편리하게 만듭니다.

Tim Ungerer

판재 기술 제품 관리 책임자, MERZ GmbH

우리는 즉시 기술 가이드 조언을 받습니다. 기술 가이드는 오류 메시지를 설명하고 자가 진단을 위한 도움을 제공합니다. 이를 통해 유지보수 담당자는 기술자 없이도 모든 문제의 80%를 해결할 수 있었습니다.

Matthias Wittsack

Rauch Landmaschinenfabrik GmbH의 기계 가공 생산관리 책임자

Experience our power tools in hall 11 at booth D57

Experience the complete product range of our power tools live. You can test the machines yourself and see the benefits for yourself. For example, our machines from the edge shaper range, as well as machines for cutting sheet metal or cleaning support strips.

TruTool TSC 200: The powerful tool against hard slag

Our brand new slat cleaner is the perfect solution for laser cutting machines with high laser power and correspondingly hard slag. The newly developed cleaning process is based on a rotating 2-stage cleaning and ensures impressive results. In addition, an innovative electronic box informs the operator of maintenance intervals.

세부 정보

TruTool PS 100: Simply remove parts from the scrap skeleton

With our part separator, we are presenting another tool that makes work easier for users of laser cutting machines. With the TruTool PS 100, small parts that are connected to micro- or nanojoints can be easily and incredibly quickly removed from the scrap skeleton. And up to 10 times faster compared to manual sorting.

세부 정보

TruTool TKA: Impressive surface quality

Our edge milling cutters are used wherever visible edges are created, cutting burrs are cleanly removed or chamfers are required for subsequent powder coating or painting. They can be used to produce chamfer lengths of up to 15 mm. The result: a uniform and oxide-free chamfer quality with high corrosion protection.

세부 정보

개요로 돌아가기