国/地域/言語選択
日本 | JA
trumpf.comへ
Euroblech
日本 | JA
MyTRUMPFへ

Exhibits

Machine tools and laser systems - that's what we do. To ensure that you remain competitive and productive, we are constantly driving forward the development of our machines. See our customized solutions for your production for yourself.

Pioneering 2D laser cutting in the long term

Would a 2D laser machine that can also handle 50-degree bevel angles be a game changer in your production? Or are you looking for a system with the best price-performance ratio that pays off even with low capacity utilization? Whatever you are looking for, you will find the best conditions with us.

TruLaser 1030 Lean Edition: price-performance in laser cutting

This world premiere masters its job and meets all budget requirements. With 6 kW, it cuts everything up to 25 mm. Get started straight away: operation is intuitive and cutting data is already integrated.

詳しくはこちら
TruLaser 3040 Bevel Cut Edition: when bevel is just right

This flatbed machine cuts up to 50° bevel angles and is economical from as little as 5% bevel cutting. At the same time, it saves up to 80 % in time and work steps. 

詳しくはこちら
TruLaser 5030 with SortLine / SortMaster Station / SortMaster Vision: sorting runs on autopilot

Experience autonomous laser cutting and sorting at the next level. This world premiere separates parts from the scrap skeleton and then sorts them perfectly. The highlight: all without programming. 

The best time for bending

Whether you are looking for a top model in bending or a machine that bends your job economically: At EuroBLECH, you will find exactly the right bending solution from TRUMPF. Simply follow the signs at the stand that say “Bend automatically here” and “Click here for the top model in bending”. Machines with an attractive investment, with mobile automation for unmanned production or with on-demand servo drive for maximum productivity await you.

TruBend 1000シリーズ
TruBend 1150: Does its job. Affordably.

For repeatable and precise bending, the TruBend 1150 is worthwhile even with low capacity utilization. You can create bending programs quickly and directly on the machine.  

詳しくはこちら
TruBend 7050 with Flex Cell: It bends automatically here

With Flex Cell, the fastest mobile bending cell from TRUMPF, you are ready to bend quickly - and finish even faster. Flexibly automated, you can produce small parts, in particular, simply and economically on just 10 m². 

詳しくはこちら
TruBend 5000シリーズとToolMaster
TruBend 5170 and ToolMaster: Top model in bending

With this version of the productive all-round machine, you can bend at maximum performance. Its on-demand servo drive makes it fast and economical, while the ToolMaster handles the changeover fully automatically. 

詳しくはこちら

Look Beyond - our solutions and services

It is crucial for the success of sheet metal production that your system works reliably around the clock. The true added value of our products unfolds through the interaction of our various solutions and services. Beyond the world of machines, we offer a world of solutions that is unique and provides two central value propositions.

Always up and running

With a TRUMPF machine, you are choosing more than just first-class technology. You are choosing the highest availability on the market. Whether it's our service app, our online updates for your machine or condition monitoring including machine diagnostics: we are always at your side. So that the machine runs and runs and runs.

詳しくはこちら
Maximize performance

Rely on expertise that goes deeper than the largest trade fair stand. No matter where you are and what you plan to do next: With us, you will find the best conditions for this. Whether parts optimization, e-shop, new bending tools, software solutions or smart factory consulting: With us as your solution partner, you can maximize your performance. So that performance increases and increases and increases.

詳しくはこちら

Welding & cutting

Easy to operate with low operating costs: We simplify your welding and cutting process with clever solutions. Whether you want to get into automated welding or are thinking about a low-cost start in flexible laser processing: At TRUMPF at EuroBLECH you will find the best conditions for your next step towards success.

TruArc Weld 1000: A specialist. Always available.

With TruArc Weld, you can easily get started with automated welding. You can create a program in just 60 seconds. Then set the starting point and start welding thanks to Smart Seam Tracking.

詳しくはこちら
TruLaser Cell 5030: Sharp cut. Precisely connected.

According to the motto “Sharp cut. Precisely connected”, you can use this machine to cut and weld components in 2D and 3D as well as pipes with 4kW. Simple and economical, even for small quantities. It is ideal for frequent component changes. 

詳しくはこちら

Our customers are convinced

"効率的な生産プロセスに必要なのは、高品質でスピーディーなマシンだけではありません。マシンの稼働に必要なあらゆる項目も、日常作業の中で出来る限り簡単かつ迅速に処理できなければなりません。この点に関して、TRUMPFのデジタルサービスから得られる可能性は、何ものにも代え難い財産です。"

マティアス・ヴィットザック
Rauch Landmaschinenfabrik GmbH機械加工生産部長

オートメーションとデジタル化は、当社にとって重要なテーマです。私にとってTRUMPFのソリューションは合点がいくものでした。

ラファエル・ヴィルゲンス
HEUNグループのデジタル化スペシャリスト

溶接シームは完璧で、いつでも同品質で再現可能です。

マティアス・ヴィンクラー
SANO Transportgeräte GmbH取締役

"TruLaser Cell 5030をラインナップしているTRUMPFには、明るい未来が待ち受けています。"

アラン・ピーターソン
3-Dimensional Services Group社長

"当社がTRUMPFとのパートナーシップを締結した理由は、 大家族同士が協力し合うような関係で仕事ができるからです。各自が相手のニーズを汲み取った上で、次世代に通用する製品を共同で生み出す体制になっています。"

マイク・バラノフスキー
3-Dimensional Services Group品質部長

マテリアルフローのあらゆる情報に携帯端末からアクセスできることにより、全従業員の日々の業務効率がアップしています。

Tim Ungerer
MERZ GmbH シート技術製品管理部門長

当社に提案された所謂テクニカルガイドには、エラーメッセージに関する説明および顧客自らが不具合を解決できる方法が書かれています。そのため当社の保守担当者は、不具合全体の約８割をそれで解決することができました。エンジニアの訪問は不要でした。

マティアス・ヴィットザック
Rauch Landmaschinenfabrik GmbH機械加工生産部長

Experience our power tools in hall 11 at booth D57

Experience the complete product range of our power tools live. You can test the machines yourself and see the benefits for yourself. For example, our machines from the edge shaper range, as well as machines for cutting sheet metal or cleaning support strips.

TruTool TSC 200: The powerful tool against hard slag

Our brand new slat cleaner is the perfect solution for laser cutting machines with high laser power and correspondingly hard slag. The newly developed cleaning process is based on a rotating 2-stage cleaning and ensures impressive results. In addition, an innovative electronic box informs the operator of maintenance intervals.

詳しくはこちら
TruTool PS 100: Simply remove parts from the scrap skeleton

With our part separator, we are presenting another tool that makes work easier for users of laser cutting machines. With the TruTool PS 100, small parts that are connected to micro- or nanojoints can be easily and incredibly quickly removed from the scrap skeleton. And up to 10 times faster compared to manual sorting. 

詳しくはこちら
Euroblech 2018, TruTool TKA 1500
TruTool TKA: Impressive surface quality

Our edge milling cutters are used wherever visible edges are created, cutting burrs are cleanly removed or chamfers are required for subsequent powder coating or painting. They can be used to produce chamfer lengths of up to 15 mm. The result: a uniform and oxide-free chamfer quality with high corrosion protection.

詳しくはこちら