Achieve the perfect bevel edge with an optimum price-performance ratio
Take advantage of this free bonus during the promotional period.
Incomparably good
Our TruTool TKF 1500 beveler and TruTool TKF 1500 beveler with 2 speeds work according to the push-pull principle, whereby material is chipped off at a predetermined angle in a constant rhythm. As a result, this process produces no dust, vapors or gases and heat generation is so minimal that no structural changes occur in the metal. You can also produce oxide-free and bare metal surfaces in a single work step without any rework required. The result: Optimal bevel edges that provide the basis for high-strength joints.
Promotion from 2024-09-01 - 2024-11-30
Advantages and areas of application
TruTool TFK 1500 beveler/TKF 1500 beveler with 2 speeds
- For chamfer lengths of up to 15 mm and angular positions continuously adjustable between 20° and 50°
- Quick and easy setting of the chamfer height and sheet thickness
- Powerful 2600 W motor for long durability
- For K, V, X and Y edges
- For straight sheet edges
- For radii and inner contours
- For tube processing
Do you have further questions or would you like a quote?
If yes, please don't hesitate to contact us.
TruTool TKF 1500 vs. TruTool TKF 1500 with 2 speeds
With the TruTool TKF 1500 beveller, you can continuously adjust the bevel angle from 20° to 55°. The 2600 W motor ensures the highest durability.
The 2-gear gearbox enables you to perform tasks adapted for the specific application. Ideal for high-tensile sheets. With continuously adjustable bevel angles from 20° to 55°