Dimensional drawing - TruTool TKA 1500
Uncompromisingly good edges
The TruTool TKA 1500 is equipped with a powerful and robust 2600 W motor, which at the same time will impress you with its extremely low noise level and enable you to work without getting tired. The resulting stable machine guidance in combination with the ergonomic guide and motor handle also has a positive effect on the chamfer quality. You can create chamfer lengths of up to 15 mm and fix them in a continuously adjustable manner and without tools. The result: high-quality, repeatable edges right away - without rework. With the TruTool TKA 1500 you can create clean visible edges, break off sharp edges, add a radius or prepare a weld seam. Any oxidation or deformation of the material is avoided.
Ergonomic operation
The handle shape, size and positioning are perfectly matched to each other. This not only ensures safe machine guidance, but also supports the chamfer quality.
In the blink of an eye
Chamfer lengths can be set as required without the need for any tools, with a max. ¾ manual turn. In this way, you have a clear view of the dial ring
Consistent edge quality
High-quality results with burr- and oxide-free surfaces, without material change and at a constant angle adjustment.
Versatile use
For straight edges, inner and outer contours and holes from 80 mm.
Simply get started
The stop prism ensures easy run-in to the sheet metal for straight sheet metal and when processing outer contours.
2 in 1
At the same time, the stop prism acts as chip protection. The chips fall on the floor in a controlled manner, ensuring a high level of occupational safety.
T-beam and flat sheet
For rounds with a radius of 2 mm, 3 mm, or 4 mm. For deburring and weld seam preparation.
For inner and outer edges
For rounds with a radius of 2 mm, 3 mm, or 4 mm. For deburring and weld seam preparation.
The following consumables and the corresponding accessories are included in the scope of delivery.
Stop prism, for easy run-in to the sheet metal
1 unit 2767143
Lubricating grease "G3", 100 g
1 unit 0353969
4 multi-edge cutters. For steel, stainless steel and aluminum
Integrated
45° multi-edge cutter mount
Integrated
Case
1 unit 2398010
Box for small parts
1 unit 0353966
Safety glasses
1 unit 2488915
Screwdriver set
1 set 2467043
Find the right consumables and accessories for your machine here.
Punching and nibbling oil for aluminum
1000 ml
0125874
Multi-edge cutter mount R
With impeller Ø 36.2 mm for 4 multi-edge cutters.
1 unit
2423977
Punching and nibbling oil for steel
500 ml
0103387
Stop prism
Helps with the run-in to the sheet metal and simultaneously acts as chip protection
1 unit
2767143
60° multi-edge cutter mount
With impeller Ø 36.2 mm for 4 multi-edge cutters
1 unit
2423976
Safety glasses
1 piece
2488915
Multi-edge cutter mount 37.5°
With impeller Ø 36.2 mm for 4 multi-edge cutters
1 unit
2731086
Multi-edge cutters ST radius 3
For steel and aluminum
Set of 10
1232671
Set of 4
2435950
Multi-edge cutters ST radius 4
For steel and aluminum
Set of 4
2435971
Set of 10
1630310
45° multi-edge cutter mount
With impeller Ø 36.2 mm for 4 multi-edge cutters
1 unit
2423973
Multi-edge cutters ST radius 2
For steel and aluminum
Set of 10
1232676
Set of 4
2435949
30° multi-edge cutter mount
With impeller Ø 36.2 mm for 4 multi-edge cutters
1 unit
2423975
Case
1 unit
2398010
Box for small parts
1 unit
0353966
Lubricating grease G3
100 g
0353969
Multi-edge cutters CR radius 2
For stainless steel
Set of 10
1232691
Set of 4
2435973
Multi-edge cutters
For steel, stainless steel and aluminum
Set of 10
2420323
Set of 4
2420322
Screwdriver set
Allen 5 mm, Allen 6 mm and TORX screwdriver T15 x 118
1 unit
2467043
Excellent guidance
The guide handle provides maximum stability while applying the optimum pressure. The tool can then be safely and precisely guided. The low handle, just nine centimeters from the work surface, minimizes the tilting moment and enables you to guide the machine smoothly with minimal effort. A further benefit.
In the blink of an eye
You can set the chamfer length as required using a dial ring over the support plate. A maximum of a ¾ turn enables you to set the desired length precisely, quickly and without tools. The cutting depth setting is firmly fixed during machining and guarantees a consistent chamfer length. A dimensionally accurate fine adjustment is required to produce radii. The dial ring also makes this easy to achieve.
|
TruTool TKA 1500 without tool
|
TruTool TKA 1500 45° tool
|
|
|---|---|---|
| Maximum chamfer lengths / Maximum chamfer heights | ||
| Maximum chamfer length, steel 400 N/mm² | 15 mm | 15 mm |
| Maximum chamfer height, steel 400 N/mm² | 10.6 mm | 10.6 mm |
| Maximum chamfer length, steel 600 N/mm² | 12 mm | 12 mm |
| Maximum chamfer height, steel 600 N/mm² | 8.5 mm | 8.5 mm |
| Maximum chamfer length, steel 800 N/mm² | 10 mm | 10 mm |
| Maximum chamfer height, steel 800 N/mm² | 7.1 mm | 7.1 mm |
| Maximum chamfer length, aluminium 250 N/mm² | 15 mm | 15 mm |
| Maximum chamfer height, aluminium 250 N/mm² | 10.6 mm | 10.6 mm |
| Radii | ||
| Smallest inner radius | 30 mm | 30 mm |
| Smallest bore hole (Ø) | 55 mm | 55 mm |
| General | ||
| Minimum sheet thickness | 3 mm + hs | 3 mm + hs |
| Working speed (max.) | 1.5 m/min | 1.5 m/min |
| Nominal power consumption | 2600 W | 2600 W |
| Dimensions | ||
| Length | 679 mm | 679 mm |
| Height | 197 mm | 197 mm |
| Weight | ||
| Weight | 10 kg | 10 kg |
PDF <1MB
Technical data sheet
The technical data of all product versions as a download.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.
Contact
Dealer search
Services
