Full-service machine for your laser production
The TruLaser Center 7030 integrates all laser cutting processes into a single machine for the first time. We scrutinized and redesigned all components and integrated them in a single machine. As a result, you get the optimal profitability out of your laser machining process.
The TruLaser Center 7030 takes care of everything – from the drawing to the sorted part.
The SmartGate prevents the tilting and unwanted welding of parts.
Additional axes, SmartGate, brush tables and SmartLift ensure pioneering productivity and uncompromising reliability
The SortMaster Speed removes and stacks large and highly delicate components at lightning speed.
TruTops Boost automatically generates a suggestion for the cutting, removal, sorting, and depositing of parts.
With pay per part, you only pay for the components that are produced.
Thin mild steel part
Your TruLaser Center 7030 fiber cuts extremely quickly, particularly in thin sheet.
Cutting of all common materials
The construction of the TruDisk enables the processing of non-ferrous metals with nitrogen – without worrying about reflections.
Automated part removal
The versatile unloading system SortMaster Speed removes and stacks large and highly delicate components extremely fast. Even parts with a manufacturing process that is difficult to automate can be transported quickly due to the small suction cup.
Perfected part separation
No more tilting or getting stuck: With SmartLift and SortMaster Speed, you can process and remove even complex geometries reliably and fully automatically.
Reliable parts handling
Parts that until now could only be processed reliably using microjoints can now be cut and removed securely using the TruLaser Center 7030. This opens up entirely new possibilities for the processing of very small parts.
Internal reinforcement
Different geometries and sheet thicknesses can be manufactured with the TruLaser Center 7030, both with process reliability and to an excellent quality standard. This sample part has an interior reinforcement for welding housings made of steel sheet with a thickness of just 1 mm.
Stiffening plate
This 1.5 mm thick steel sheet part has a stiffening plate for cross member units and is part of the TruLaser Center 7030 clamping unit.
Locking mechanism
This sample part made of steel sheet has a thickness of 12 mm and locks the tilt mechanism of the TruLaser Center 7030.
|
TruLaser Center 7030
|
|
|---|---|
| Installation area | |
| Length | 10135 mm |
| Width (cart extended) | 10720 mm |
| Width (cart retracted) | 6420 mm |
| Height | 3050 mm |
| Weight with all units | 38860 kg |
| Nominal working range | |
| X axis | 3000 mm |
| Y axis | 1500 mm |
| Z axis | 120 mm |
| TruDisk 6001 laser-specific data | |
| Maximum laser power | 6000 W |
| Maximum sheet thickness, mild steel | 12.7 mm |
| Maximum sheet thickness, stainless steel | 12.7 mm |
| Maximum sheet thickness, aluminum | 6 mm |
| Maximum sheet thickness, brass | 6 mm |
| Maximum sheet thickness, copper | 6 mm |
| TruDisk 12001 laser-specific data | |
| Maximum laser power | 12000 W |
| Maximum sheet thickness, mild steel | 12.7 mm |
| Maximum sheet thickness, stainless steel | 12.7 mm |
| Maximum sheet thickness, aluminum | 6 mm |
| Maximum sheet thickness, brass | 6 mm |
| Maximum sheet thickness, copper | 6 mm |
| SmartGate unloading automation | |
| Maximum part size | 160 mm x 160 mm |
| Minimum part size | 30 mm x 30 mm |
| SortMaster Speed unloading automation | |
| Maximum part size | 2000 mm x 1500 mm 1 |
| Minimum part size | 90 mm x 60 mm |
The technical data of all product versions as a download.
Reliable or fast? The TruLaser Center 7030 resolves this classic conflict in laser processing for the very first time.
Reliable
The SmartGate, along with the brush tables, prevent the tilting and unwanted welding of parts. The intelligent support moves with the cutting head and provides support for your parts during cutting. The ejector cylinder automatically finds the best point for every part geometry to push the part out through the scrap skeleton and discharge it securely.
The pins of the SmartLift, which can be positioned with flexibility, press the cut parts against the suction plate of the SortMaster Speed from below. At the same time, this fixes the part from above. Fixed in this way, the part is taken out of the scrap skeleton by a synchronous lift motion. This means even delicate parts are held securely and do not tilt in the kerf.
Quick
The movement of the sheet is superimposed by a highly dynamic additional axis on the cutting head. This means that you can cut corners and complex contours at high speeds. This strong combination means that you get the most out of the high feed rates of the solid-state laser.
Within seconds, the SmartGate removes small parts into up to eight containers. Slugs and scrap fall into a slag cart. Your key for maximum throughput: The removal of residual material causes minimal interruption to the cutting process – a result of the intelligent control and sensor system of the SmartGate.
The SortMaster Speed stacks parts at lightning speed and with perfect order on up to eight pallets. As soon as the SortMaster Speed takes the part, the machine continues cutting. The part is taken to its deposit position parallel to production. Interruption to the machining process is minimal.
Automated
The TruTops Boost programming system automatically generates a suggestion for the cutting, removal, sorting, and depositing of parts. In doing so, it even takes physical conditions into consideration. For example, how the part can best be pushed out of the scrap skeleton to eliminate any chance of it tipping.
A sorting flap reliably separates finished parts from scrap. The SortMaster Box Linear sorting unit distributes small parts into up to eight containers parallel to production. The containers are assigned intelligently by the software program.
Self-reliant
The processing cell loads and unloads independently and announces when the operator is needed. Because of this, the operator can plan his/her work at the machine better. Waiting times, manual sorting, and rework are a thing of the past. The Touchpoint user interface also enables an intuitive dialog with the machine.
The LoadMaster Center places the unprocessed sheet on the brush table in the clamping unit. High-performance peeling techniques separate the sheet reliably from the stack.
Through program control, the automatic nozzle changer inserts the correct nozzle. The nozzle changer is located in the machine cabinet during processing, which makes it possible to set up parallel to production.
Seamless integration of multiple TRUMPF machines into your own software environment is very easy. We have the right solution for every combination, whether it be integration into Oseon or a connection to monitoring and analysis tools. A connection to third-party software systems is also possible with our interfaces based on the OPC UA standard.
TruTops Boost
Construct and program your laser, punching, and combination punch laser machines intelligently with TruTops Boost, your all-in-one 3D solution. Numerous automated processes save you time-consuming routine processes and the joint nesting pool saves time and material. You also always have an overview of all manufacturing orders and order-based work.
Software
The software portfolio from TRUMPF optimizes your entire production process – from the customer query to delivery of the finished part. TRUMPF combines the software intelligently with machines and services to create customized Industry 4.0 solutions for your Smart Factory.
Take full advantage of the huge productivity of your machine – due to the TruLaser Center 7030's connection to a store, your machine is always supplied with unprocessed material and can store finished parts.
Large store, short distances
Connect your TruLaser Center 7030 to all common storage systems, such as the TruStore store from TRUMPF or large-scale storage systems from STOPA. The modular stores can always be customized and extended to fit your needs.
Side storage connection for unprocessed material and finished parts
Unprocessed material enters the machine from the side. While the stacked finished parts return into the store on pallets, small parts in boxes are removed from the front of the machine. The tandem relay gives you direct access to the next storage pallet and reduces waiting times.
Side storage connection for raw material and finished parts with flexible access to parts
The machine is supplied with raw material from the store from the side. Handle finished parts with flexibility, for example you can remove them directly from the machine during the day, and place them back in the store at night. You can also remove parts directly from the unloading cart, or use a moving floor or storage palette compatible with forklift trucks – the solutions are numerous and always suit your requirements.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.
Footnotes-
Dimensions may vary slightly due to technical machine characteristics.
