Country/region and language selection
Image processing sensor system for cutting and welding applications
Image processing sensor system for cutting and welding applications
Sensor system

Image processing for cutting and welding applications

Trust in your process with TRUMPF process sensors.

Total confidence with TRUMPF process sensors!

You can avoid defective parts with TRUMPF's image processing solution VisionLine. Camera-based image processing means you can keep an eye on everything for cutting and welding applications. VisionLine automatically detects the component position, forwards this information to the control, and ensures that the welding seam is always in the right place. With the Basic, Detect and Project options, you can choose between simple monitoring of the workpiece, characteristics recognition or a customer-specific extension. Image processing is available for lasers with optics as an integrator package as well as for the TruLaser Station and TruLaser Cell systems.

Thanks to the intuitive user interface and pre-defined attribute library, it is very easy to integrate VisionLine in the production process. After just a few work steps, the operator can start right away.

Highly integrated solutions from a single source

Enjoy the benefits of having TRUMPF as an entire system supplier – from the laser to the process sensor system and consulting.

Improve process capability

Reduce your component positioning requirements without any loss of quality.

Easy to do by yourself

The attribute library supports the person doing the set-up work as they create their image processing tasks.

Transparent and reliable

You can save image data at any time to guarantee traceability.

Hairpin welding with VisionLine image processing

Hairpin welding with VisionLine image processing

A typical application for VisionLine image processing is
position recognition of hairpins in stators which are used in electric motors.

Welding of electronic components

The image processing system detects the pins that are to be welded, for example in electronic control units, sensors, and actuators.

Laser welding of joint connections

Welding of joint connections

Image processing enables you to detect seam points when welding heat exchangers or seat rails, indicating they are welded at the right location.

TRUMPF GmbH * Co. KG

Marking of gear parts

When marking components, VisionLine supports quality control with the "distance measurement" function.

Image processing for cutting and welding applications
Configuration  
Systems available TruLaser Cell 3000
Available lasers TruDiode, TruDisk, TruFiber, TruPulse
Available options Basic, Detect, Project
Adjust (TruLaser Cell 3000)
Available focal lengths 150 / 200 mm (FocusLine Professional)
150 / 200 / 250 mm (WeldLine Modular)
150 / 200 / 250 / 300 mm (BEO D50)
200 / 300 mm (BEO D70)
255 / 345 / 450 mm (PFO 33-2)
255 / 450 mm (PFO 3D-2)
Lighting -
Parameters  
Typ. image processing time 80 ms - 150 ms
Typ. precision of the working distance search ± 50 μm with f = 150 mm (TruLaser Cell 3000)
Typ. precision of the position recognition ± 20 μm in the image center
Image processing, VisionLine Basic

VisionLine Basic

A digital camera image with cross-hairs in the laser focus helps with workpiece monitoring and teaching. Using the VisionLine Basic in combination with the TRUMPF scanner optics of the PFO series is particularly advantageous. In this case, the offset between the laser light and monitoring light outside of the center of the scan field is corrected so that the focus position shown in the image corresponds to the actual position of the laser focus.

Detection of characteristics with VisionLine Detect

VisionLine Detect

Edge-detection offers the option of integrating simple characteristics recognition on the workpiece in the production process for position correction. The appropriate distinguishing features (for example, blots, circles, lines or intercept points) can be selected from a template library for many application scenarios.

VisionLine Project

VisionLine Project

With an additional service package, TRUMPF provides a complete solution for complex image processing tasks. Programming the process-stable image processing, including extensive documentation is performed, subject to a successful feasibility study.

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

AI Training Platform – EasyModel AI

Expand the VisionLine Detect options with EasyModel AI. The cloud-based AI training platform makes it possible to achieve good results without programming knowledge and with little training data. This allows you to train image-based AI models precisely to your requirements and your component. With the optional AI Filter for VisionLine Detect, you can improve feature detection and make your process less dependent on external influences, such as difficult lighting situations or fluctuating pre-processes.

You may also find these topics interesting

E-mobility made with TRUMPF lasers
E-mobility made with TRUMPF lasers

Creating the future today. Discover how you can shape the mobility of the future with our manufacturing solutions.

3D laser cutting machines from TRUMPF
3D laser cutting

Regardless of whether you need to cut 3D components, profiles, or tubes – as a pioneer in 3D laser processing, TRUMPF can provide the perfect 3D laser cutting machine for your application.

Processing optics

As a result of their modular system, TRUMPF processing optics can be adjusted to suit different applications and spatial conditions.

Contact
Laser Technology Sales
Fax +65 6571 8001
Email
Services
Training courses Find out more Technical Service Find out more Spare parts Find out more Process optimization Find out more Monitoring and analysis Find out more Product enhancements Find out more Service agreements Find out more
Downloads
Service & contact