Country/region and language selection

The advantages of our robotic welding cells

Robotic welding with TRUMPF helps to solve welding challenges

A shortage of skilled workers and increasing quality requirements are major challenges faced by companies when it comes to welding. Robotic welding with TRUMPF is the solution: robots take over the standard welding jobs, which means fewer skilled welders are needed. The robot also produces with consistent quality. This leads to improved planning. There are other positive effects as well: Productivity increases and part costs can decrease.

1. High-performance components

From the robot or cobot to the optics and welding source, everything is perfectly conceptualized and optimized for automated welding.

Find out more

2. Incredibly simple programming

Programming is conveniently performed offline on the computer or by simple programming on the machine. In any case, the welding parameters are included.

Find out more

3. Efficient operation parallel to production

In two-station operation or with dual station tables and rotary tables, you set up the machine with the new part while it is welding with high productivity.

Back

4. Fixtures - benefit from TRUMPF expertise

In workshops or seminars - which are completely free of charge in the WeldGuide anyway - you will learn everything you need to successfully perform automated welding.

Find out more

5. Accessibility – safely weld even complex and large components

With additional axes in the positioners and the rotary module on the optics, you can also weld components with difficult geometries in a tool setup.

Find out more

High-performance components - automated welding thanks to intelligent robotic and optics solutions

Industrial robot

For laser welding, TRUMPF relies on high-quality, precise industrial robots. They are particularly low-maintenance and have been tried and tested thousands of times in industry.

Laser and optics

At the core of every TRUMPF laser welding cell are the laser and the welding optics. At TRUMPF, the entire system comes from a single source, including the beam guidance. It is perfectly tailored to the respective welding job. BrightLine Scan optics are a special highlight, combining the properties of scanner optics with those of focusing optics.

Cobot

A collaborative robot, nicknamed Cobot, is used on the TruArc Weld 1000. You can simply move the robot by hand for programming. The process is particularly easy thanks to the integrated force-momentum sensor.

Welding source and torch

For arc welding, TRUMPF relies on a partnership with Fronius and their high-performance welding sources and torches.

Incredibly simple programming

Simple programming for arc welding

For simple programming, TRUMPF has equipped the collaborative robot (cobot) of the TruArc Weld 1000 with an operating unit for storing the paths as well as the start and end points of the weld seam. The control also contains templates that simplify programming. In this way, skilled welders become programmers without requiring a great deal of training. An E-learning course is sufficient.

High-quality visualization and the sensor system make work easier

With the outstanding process visualization of the TruLaser Weld 5000, you can keep an eye on the weld seam and optimally adjust your process. Sensor systems make your work even easier. TeachLine, for example, reliably detects the position of the component and adjusts your program accordingly before welding.

TruTops Weld: Program offline, while the machine is producing

With TruTops Weld, you program while your TruLaser Weld 5000 machine is welding. And that's not all. The program creation is also significantly faster: TruTops Weld calculates the robot movement automatically instead of approaching and programming each point individually with the robot. Additional software functions reduce more work for you.

Welding parameters included

You receive an extensive set of welding parameters with your robotic welding cell - regardless of whether you weld with an arc or with a laser. You benefit from our expertise and save yourself the trouble of searching for parameters.

Efficient operation parallel to production

Two-station operation

Depending on the component and lot sizes, the TruArc Weld 1000 welding cells are used in single-station or two-station operation. The robot travels on a linear axis from station 1 to station 2.

Dual station table

The dual station table and the TruLaser Weld 5000 enable you to set up outside the cell during the welding process. This boosts the efficiency of your system.

Rotary table

Double your throughput – the rotary table rotates by 180° in its processing position within the cell, and back to the loading position. This is perfect for fast "round-the-clock" processing of high piece counts.

Fixtures - benefit from TRUMPF expertise

Sheet metal fixtures

TRUMPF customers can learn the basic principles of fixture design in seminars or customized workshops. The focus is on fixtures made of sheet metal, as this is usually the more economical solution compared to other fixture concepts. For this purpose, cut sheets of metal are inserted into one another to form the main body of the fixture.

Simple fixtures made of standard clamping elements

For small series, you can also use standard clamping systems to build a fixture. This is economical because the clamping elements can be reused several times. The fastening is easy via the work table with standard D16 hole pattern in 50 x 50 mm scale.

Welding without a fixture

For very small piece counts, investing in a separate fixture is often not worthwhile. It is also not necessary. For small piece counts, you can tack components and use simple clamps as a stop.

Everything you need to know - completely free of charge in the WeldGuide

In the WeldGuide you will find exclusive tips on the topic of fixtures and numerous practical examples. This allows you to make even better use of your TRUMPF robotic welding cell and perhaps discover new possibilities for future orders.

Find out more

Accessibility – safely weld even complex and large components

Rotary module

With the rotary module on the TruLaser Weld 5000, the shielding gas nozzle and welding wire nozzle can rotate 360° around the optics. This means less reorientation of the robot is required and access is improved. The programming is also simpler, particularly for complex geometries.

Rotate and tilt positioner

The rotate and tilt positioner on the TruLaser Weld 5000 offers two additional axes. It can rotate and tilt, thereby bringing the component and the welding optics together in the best possible way.

Rotary table with rotating or turning axis

An additional rotary axis on the compact rotary table or a turning axis on the larger rotary table properly align your components. This improves accessibility.

Turnover positioner for XXL components

The TruLaser Weld 5000 robot travels along a linear axis, covering a large work area. In line with this, the system has a four-meter long turnover positioner. This allows you to efficiently weld particularly large components.

You may also find these topics interesting

Technology-Picture-laser-welding-machines

Laser welding systems

Our laser welding systems are the perfect tool for joining metal, plastic, and other materials with perfect seams and no distortion.

Automated robot welding

Arc welding or laser welding – which welding application is the right one for you? We show you how you can gain the advantage in your industry thanks to automated welding and how TRUMPF can offer you the best possible support.

Contact

Vertrieb Laserschweißen

Downloads

TruLaser Weld brochure

pdf - 4 MB

TruArc Weld 1000 brochure

pdf - 1 MB

Service & contact