TruTool C 200 18V LiHD rechargeable battery
Specialized for versatile applications
The TruTool C 200 18V LiHD rechargeable battery features an open cutting head. This allows you to pull the machine out of the sheet easily. A chip clipper is not necessary. The steel cutting head is powerful and robust. You can achieve an extraordinary amount of power when cutting spiral ducts. The tool set used for spiral ducts, which consists of toothed cutting blades and a robust SC cutter, is capable of fold thicknesses of up to 3.6 mm with mild steel and enables both longitudinal sections and cross-sections. To broaden the range of applications, we have 5 further sets. This enables you to place the focus on cutting quality, speed, performance on curves, or the material. The 4.0 Ah / 18V LiHD rechargeable battery also ensures long runtimes.
Cordless Alliance System
Cross-manufacturer rechargeable battery system for leading power tool brands. 100% compatibility in the 18-volt class.
Brushless motor
Practically unlimited service life, virtually wear-free and hardly any maintenance. Battery performance per charge is also increased.
Perfectly combined
Three different cutting blades combined with the right cutter ensure even greater specialization.
Extremely powerful
The 18 V battery machine separates mild steel sheet thicknesses of up to 2 mm, fold thicknesses up to 3.6 mm, and even stainless steel sheets up to 1.5 mm.
Nice and easy: without chip clipper
The open cutting head enables you to pull the machine easily out of the sheet.
For comfortable operation
A soft grip ensures low-vibration machine control. The machine is thereby extremely compact and light.
Spiral ducts
For cutting spiral ducts. Cuts in all directions, even over folds.
Flat sheet
For cutting and trimming flat sheets. For radial and interior cutouts as well as notching.
Profiles
For cutting C-L-U profiles and longitudinal cuts in profile sheets.
Tubes
For cutting tubes.
Rice grain sheet
For cutting rice grain sheets. For radial and interior cutouts.
Checker plate
For cutting checker plates. For radial and interior cutouts.
Coil processing
For cutting coils. For relief cuts and sampling.
The following consumables and the corresponding accessories are included depending on the machine.
Set Spiro (fitted)
1x SC cutter, 2x toothed cutting blade
18V LiHD 4 Ah rechargeable battery (2 units)
1 unit 2598811
12V-36V recharger LG
1 unit, DE/CH version: 2569784 | 1 unit, GB version: 2569786 | 1 unit, USA version: 2569785
TRUMPF Box S2
1 unit 1763682
Find the right consumables and accessories for your machine here.
Standard cutting blade 1.5-2 mm
Ideal for sheet thicknesses 1.5 mm - 2 mm
Set of 1
2332028
Cutter SC
Ideal for spiral ducts up to 4 x 0.035 in.
Set of 2
1279109
Set of 5
1279110
Toothed cutting blade
Ideal for spiral ducts up to 4 mm x 0.9 mm
Set of 1
2332027
Set CR
1x CR cutter, 2x CR cutting blade
Set of 1
2328886
Cutter CR
Ideal for sheet thicknesses 0.02 - 0.06 in.
Set of 2
1279142
Set of 5
1279143
18V LiHD 4.0Ah rechargeable battery
1 unit
2598811
Set Curves
1x curves cutter, 2x cutting blade
Set of 1
2328887
Set HighQuality
1x straight cutter, 2x cutting blade
Set of 1
2328883
Set HighSpeed
1x cutter, 2x toothed cutting blade
Set of 1
2328884
Curve cutter
Good curvability. For sheet thicknesses up to 0.02 - 0.06 in. Left 1.77 in. / right 3.15 in.
Set of 2
1279145
Set of 5
1279146
Set Spiro
1x SC cutter, 2x toothed cutting blade
Set of 1
2328882
Straight cutter 0.02 -0.06 in.
Ideal for sheet thicknesses 0.02 - 0.06 in.
Set of 2
1279107
Set of 5
1279108
18V starter kit
1x LG 12V-36V recharger / 2x 18V LiHD 4.0 Ah rechargeable battery
1 Set (DE)
2598816
1 set (GB)
2598820
1 Set (USA)
2598818
LG 12V-36V recharger
For 12V and 18V LiHD rechargeable battery
1 unit (DE/CH)
2569784
1 unit (GB)
2569786
1 unit (USA)
2569785
Cutting blade CR up to 1.5 mm
Ideal for sheet thicknesses up to 1.5 mm
Set of 1
2361121
Set ThinSheet
1x straight cutter, 2x cutting blade
Set of 1
2328885
Straight cutter 1.5 - 2 m
Ideal for sheet thicknesses 1.5 mm - 2 mm
Set of 2
2365673
Set of 5
2365674
TRUMPF Box S2
1 unit
1763682
Power-Head Technology
The light metal gear head's ingenious design is specially adapted to the low voltage battery technology. Decoupling the motor pinion from the motor minimizes energy loss and ensures even higher performance per battery charge.
Brushless motor
The powerful BL motor generates higher torques than conventional motors, requires less power and generates hardly any heat. This positively affects battery performance and means you get the maximum from every battery charge. A further advantage is the practically limitless service life of a BL motor due to the absence of carbon brushes and therefore no mechanical wear. This means almost wear-free and maintenance-free motors.
Compact and powerful
The 18V rechargeable battery tool has a lightweight design enabling fatigue-free working. The soft grip ensures safe and low-vibration working. All TRUMPF rechargeable battery tools are also available as stand-alone versions, i.e. without rechargeable batteries and recharger. If you already have CAS batteries available, you then have the option to save on resources and cut costs.
Optimal working speed
You can use the speed controller to adjust the working speed to suit the individual cutting task. It is extremely efficient if you work in accordance with the predefined cutting lines or a template. It is also well-suited to frequent processing of radii and stainless steel. The electronic overload protection offers yet another notable benefit.
Perfectly combined
With the TruTool C 200, both the cutters and the cutting blades are adapted to the respective application. The toothed cutting blade achieves an automatic feed and reduces the feed force. This results in exceptionally high working speeds and simple processing of double sheets. With the standard cutting blade, the cutting quality takes precedence over the cutting speed. The CR cutting blade is used to process stainless steel. We offer the different cutting blades with matching cutters in six sets: Set Spiro, Set HighQuality or HighSpeed up to 2 mm, Set ThinSheet up to 1.5 mm, and the Set Curves and Set CR.
|
TruTool C 200 18V LiHD rechargeable battery
|
|
|---|---|
| Maximum sheet thicknesses | |
| Spiral duct steel 400 N/mm² | 4 x 0.9 mm |
| Spiral duct steel 600 N/mm² | 4 x 0.6 mm |
| Radii | |
| Smallest radius | L 40 mm / R 50 mm |
| General | |
| Working speed (max.) | 10 m/min |
| Starting hole diameter | 8 mm |
| Voltage | 18 V |
| Dimensions | |
| Length | 394 mm |
| Height | 119 mm |
| Weight | |
| Weight (incl. rechargeable battery) | 2.4 kg |
PDF <1MB
Technical data sheet
The technical data of all product versions as a download.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.
