TruTool PN 200 18V LiHD rechargeable battery, dimensional drawing
Independent and powerful for medium profile depths
For the first time, you can use battery machines cordlessly to cut sheet thicknesses in mild steel up to 2 mm, even in the case of doubled sheets. The machine has a short tool and is specially designed for trapezoidal sheets with medium profile depths and C-L-U profiles. The machine can be turned on the spot by 360°. The cutting direction, punch, and die carrier can be changed quickly, without the need for tools. You can choose from various tool depths to broaden the areas of application. The 4.0 Ah / 18V LiHD rechargeable battery also ensures long runtimes. It is worth mentioning that the machine is available as a set with a long and short tool.
Cordless Alliance System
Cross-manufacturer rechargeable battery system for leading power tool brands. 100% compatibility in the 18-volt class.
Brushless motor
Practically unlimited service life, virtually wear-free and hardly any maintenance. Battery performance per charge is also increased.
Machine with short tool
For processing profile depths of up to 3.4 inches and C, L, and U profiles. It is also well-suited for corrugated sheet.
Ideal for hard-to-reach places
You can adjust the working direction through 360° in steps of 45° easily, without the need for tools.
Trapezoidal sheets
For cutting profile depths up to 86 mm. For straight and diagonal cuts.
Profiles
For cutting C-L-U profiles.
Corrugated sheet
For trimming to length and cutting. For diagonal cuts, interior cutouts, and radial cuts.
The following consumables and the corresponding accessories are included in the scope of delivery.
Wear plate (integrated)
1 unit 2260208
Punch guide (integrated)
1 unit 1884927
Standard punch (integrated)
1 unit 2260206
Standard die (integrated)
1 unit 2260207
1 hexagonal wrench T x 20
1 unit 0359907
12V-36V recharger LG
1 unit, DE/CH version: 2569784 | 1 unit, GB version: 2569786 | 1 unit, USA version: 2569785
18V LiHD 4 Ah rechargeable battery (2 units)
1 unit 2598811
TRUMPF Box S2
1 unit 1763682
Tool PN 200 (integrated)
1 unit 1750693
Find the right consumables and accessories for your machine here.
Standard die
Set of 2
1264153
Set of 5
1264154
1 unit
2260207
Die P1
Thin-sheet die up to sheet thickness 0.039 in.
1 unit
2260209
Punching and nibbling oil for aluminum
1000 ml
0125874
Standard punch
Set of 5
1315713
Set of 2
2260376
1 unit
2260206
18V starter kit
1x LG 12V-36V recharger / 2x 18V LiHD 4.0 Ah rechargeable battery
1 Set (DE)
2598816
1 set (GB)
2598820
1 Set (USA)
2598818
Punching and nibbling oil for steel
500 ml
0103387
Punch guide
1 unit
1884927
Set of 2
1264367
Set
2 x punch, 1 x die and 2 x wear plate
Set of 1
1429289
LG 12V-36V recharger
For 12V and 18V LiHD rechargeable battery
1 unit (DE/CH)
2569784
1 unit (GB)
2569786
1 unit (USA)
2569785
Wear plate
Protects the die holder against excessive wear
Set of 2
1429275
Set of 5
1429276
1 unit
2260208
18V LiHD 4.0Ah rechargeable battery
1 unit
2598811
TRUMPF Box S2
1 unit
1763682
Tool TruTool N 200
1 unit
1750694
Tool TruTool PN 201
1 unit
2287067
Tool TruTool PN 200
1 unit
2287065
Power-Head Technology
The light metal gear head's ingenious design is specially adapted to the low voltage battery technology. Decoupling the motor pinion from the motor minimizes energy loss and ensures even higher performance per battery charge.
Brushless motor
The powerful BL motor generates higher torques than conventional motors, requires less power and generates hardly any heat. This positively affects battery performance and means you get the maximum from every battery charge. A further advantage is the practically limitless service life of a BL motor due to the absence of carbon brushes and therefore no mechanical wear. This means almost wear-free and maintenance-free motors.
Compact and powerful
The 18V rechargeable battery tool has a lightweight design enabling fatigue-free working. The soft grip ensures safe and low-vibration working. All TRUMPF rechargeable battery tools are also available as stand-alone versions, i.e. without rechargeable batteries and recharger. If you already have CAS batteries available, you then have the option to save on resources and cut costs.
Optimal working speed
You can use the speed controller to adjust the working speed to suit the individual cutting task. It is extremely efficient if you work in accordance with the predefined cutting lines or a template. It is also well-suited to frequent processing of radii and stainless steel. The electronic overload protection offers yet another notable benefit.
|
TruTool PN 200 18V LiHD rechargeable battery
|
|
|---|---|
| Maximum sheet thicknesses | |
| Maximum sheet thickness, steel 400 N/mm² | 2 mm |
| Maximum sheet thickness, steel 600 N/mm² | 1.5 mm |
| Maximum sheet thickness, steel 800 N/mm² | 1 mm |
| Maximum sheet thickness, aluminium up to 250 N/mm² | 3 mm |
| Radii | |
| Smallest radius | 50 mm |
| General | |
| Working speed (max.) | 1.9 m/min |
| Starting hole diameter | 24 mm |
| Voltage | 18 V |
| Dimensions | |
| Length | 325 mm |
| Height | 194 mm |
| Weight | |
| Weight (incl. rechargeable battery) | 2.2 kg |
PDF <1MB
Technical data sheet
The technical data of all product versions as a download.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.
