TruTool S 250 LiHD rechargeable battery 18V, dimensional drawing
Cut easily without exertion
The TruTool S 250 18V LiHD is the only rechargeable battery shear capable of cutting sheet thicknesses of 2.5 mm in mild steel and 1.5 mm in stainless steel. With this tool you always have an unrestricted view of the work surface and the cutting line. In addition, the compact machine is extraordinarily powerful and you can work without tiring, using only a low feed force. Curves can also be processed effortlessly. This is made possible by the perfectly coordinated geometry of the cutter, cutting table and hand protection. In addition, any collision with the sheet metal chip is avoided during the cutting process, ensuring a very high level of operator protection.
No exertion
Minimal feed force thanks to perfectly coordinated geometry of the cutter, cutting table and chip guard.
Extraordinary for curves
The rhombus-shaped cutters ensure a pleasant cutting behaviour - even with curve and coil cuts.
No collisions during cutting
Perfect guiding of the cutting chip thanks to the optimally coordinated positioning of the cutting table and hand protection.
Safe operation
The dimensions and positioning of the hand protection provide maximum operator safety when cutting.
Ergonomic
The soft grip ensures low-vibration operations.
Long service life
Low operating costs as a result of the durable cutter and the 2-way cutter rotation option.
Flat sheet
Cutting and trimming of straight sheets. For radial and interior cutouts.
Profiles
For cutting C-L-U profiles
Coil processing
For cutting coils. For relief cuts and sampling.
The following consumables and the corresponding accessories are included in the scope of delivery.
Cutter, 2 units
(installed)
18V LiHD 4 Ah rechargeable battery (2 units)
1 unit 2598811
12V-36V recharger LG
1 unit, Version DE / CH: 2569784 | 1 unit, Version GB: 2569786 | 1 unit, Version USA: 2569785
TRUMPF Box S2
1 unit 1763682
Find the right consumables and accessories for your machine here.
Cutter CR
For high-tensile sheets up to 800 N/mm2
Set of 2
2751131
Cutter
For steel up to 400 N/mm2
Set of 2
2777388
Set of 10
2750848
18V starter kit
1x LG 12V-36V recharger / 2x 18V LiHD 4.0 Ah rechargeable battery
1 Set (DE)
2598816
1 Set (GB)
2598820
1 Set (USA)
2598818
LG 12V-36V recharger
For 12V and 18V LiHD rechargeable battery
1 unit (DE/CH)
2569784
1 unit (GB)
2569786
1 unit (USA)
2569785
18V LiHD 4.0Ah rechargeable battery
1 unit
2598811
TRUMPF Box S2
1 unit
1763682
Power-Head Technology
The light metal gear head's ingenious design is specially adapted to the low voltage battery technology. Decoupling the motor pinion from the motor minimises energy loss and ensures even higher performance per battery charge.
Brushless motor
The powerful BL motor generates higher torques than conventional motors, requires less power and generates hardly any heat. This has a positive effect on battery life and allows you to get the most out of every battery charge. Additional advantage: The service life of a BL motor is almost unlimited because it works without carbon brushes and therefore is not subject to mechanical friction. The result: practically wear-free motors and little maintenance.
Compact and powerful
The 18V cordless machine is lightweight and allows you to work without tiring. The soft grip ensures safe operations with a low level of vibration. All TRUMPF cordless machines are also available as a solo version, i.e. without batteries and recharger. If you are able to use existing CAS batteries, this offers you the opportunity to conserve resources and save costs.
Optimal working speed
You can use the speed controller to adjust the working speed to suit the individual cutting task. This is extremely efficient if you work in accordance with predefined cutting lines or a template. It is also useful for frequent processing of radii and stainless steel. Another plus is the electronic overload protection.
|
TruTool S 250 18V LiHD rechargeable battery shear
|
|
|---|---|
| Maximum sheet thicknesses | |
| Maximum sheet thickness, steel 400 N/mm² | 2.5 mm |
| Maximum sheet thickness, steel 600 N/mm² | 2 mm |
| Maximum sheet thickness, steel 800 N/mm² | 1.5 mm |
| Maximum sheet thickness, aluminium up to 250 N/mm² | 3 mm |
| Radii | |
| Smallest radius | 20 mm |
| General | |
| Working speed (max.) | 8 m/min |
| Starting hole diameter | 28 mm |
| Voltage | 18 V |
| Dimensions | |
| Length | 325 mm |
| Height | 189 mm |
| Weight | |
| Weight (incl. rechargeable battery) | 2.5 kg |
PDF <1MB
Technical data sheet
The technical data of all product versions as a download.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.
Contact
Services
