TruTool TF 350 LiHD rechargeable battery 18V, dimensional drawing
Cordless connecting – fast, economical and independent
Joining of ventilation ducts is often performed on site at the construction site. With the battery machine, you are not reliant on the power supply and can work conveniently and cordlessly. The TruTool TF 350 LiHD rechargeable battery enables you to join coated or uncoated workpieces with material thicknesses of 0.8mm to 4mm. The resulting permanent connections can be performed in a single operation and require no additional connecting elements thereby ensuring maximum cost-effectiveness. The 4.0 Ah / 18V LiHD rechargeable battery ensures long runtimes.
Cordless Alliance System
Cross-manufacturer battery system for leading power tool brands. 100% compatibility in the 18-volt class.
Brushless motor
Practically unlimited service life, virtually wear-free and hardly any maintenance. Battery performance per charge is also increased.
Straight to the point
The connection point is secure and resilient and the joining points are resistant to corrosion.
No connecting elements
No screws or rivets are used, This saves money and simplifies handling.
Joining ducts
Up to three parts can be connected together, even if the sheet thickness varies. For coated sheet metal, mild steel, stainless steel, aluminium or with intermediate layers such as adhesive and plastic mats.
Joining frame profiles
For joining connection flanges on ventilation and heating ducts.
The following consumables and the corresponding accessories are included in the scope of delivery.
Grease gun (filled with "G1")
1 unit 1398728
Stripper for ducts
1 unit 0112929
Punch (integrated)
1 unit 1884902
Allen key DIN 911-6
1 unit 0067865
Stripper for straight sheets (integrated)
1 unit 0053649
Allen key DIN 911-3
1 unit 0067830
Allen key DIN 911-5
1 unit 0067857
Case
1 unit 2282148
12V-36V recharger LG
1 unit, DE/CH version: 2569784 | 1 unit, GB version: 2569786 | 1 unit, USA version: 2569785
18V LiHD 4 Ah rechargeable battery (2 units)
1 unit 2598811
Tilting arm for punch
1 unit 0128748
Die arm fixed No. 3 sheet thickness 3.1 – 3.5
1 unit 0118132
Find the right consumables and accessories for your machine here.
Tilting arm for die No. 2
Well-suited to sheet thicknesses of 1.6 - 2 mm. Can be selected with die No. 1, 2, 2+, 3- or 3.
1 unit
0128793
Die arm fixed No. 3-
Well-suited to sheet thicknesses of 2.6 - 3 mm. Can be selected with die No. 1, 2, 2+, 3- or 3.
1 unit
0129764
Tilting arm for punch
1 unit
0128748
Stripper for straight sheets
1 unit
1884874
Die arm fixed No. 2
Well-suited to sheet thicknesses of 1.6 - 2 mm. Can be selected with die No. 1, 2, 2+, 3- or 3.
1 unit
0118131
Joining station
For quick and easy joining together of smaller sheet parts. Well-suited for stationary use.
1 unit
1224803
LG 12V-36V recharger
For 12V and 18V LiHD rechargeable battery
1 unit (DE/CH)
2569784
1 unit (GB)
2569786
1 unit (USA)
2569785
Die No. 2+
Well-suited to sheet thicknesses of 2.1 - 2.5 mm. You can choose between five different dies depending on the material thicknesses: 1, 2, 2+, 3- or 3.
1 unit
0122272
Die No. 3-
Well-suited to sheet thicknesses of 2.6 - 3 mm. You can choose between five different dies depending on the material thicknesses: 1, 2, 2+, 3- or 3.
1 unit
1884875
Die arm fixed No. 1
Well-suited to sheet thicknesses of 0.8 - 1.5 mm. Can be selected with die No. 1, 2, 2+, 3- or 3.
1 unit
0118130
Die No. 2
Well-suited to sheet thicknesses of 1.6 - 2 mm. You can choose between five different dies depending on the material thicknesses: 1, 2, 2+, 3- or 3.
1 unit
0111968
Tilting arm for die No. 3
Well-suited to sheet thicknesses of 3.1 - 3.5 mm. Can be selected with die No. 1, 2, 2+, 3- or 3.
1 unit
0128794
Tilting arm for die No. 3
Well-suited to sheet thicknesses of 2.6 - 3 mm. Can be selected with die No. 1, 2, 2+, 3- or 3.
1 unit
0129724
Tilting arm for die No. 2+
Well-suited to sheet thicknesses of 2.1 - 2.5 mm. Can be selected with die No. 1, 2, 2+, 3- or 3.
1 unit
0129723
Punch
1 unit
1884902
Set of 2
1264160
Die No. 3
Well-suited to sheet thicknesses of 3.1 - 3.5 mm. You can choose between five different dies depending on the material thicknesses: 1, 2, 2+, 3- or 3.
1 unit
0111967
Die No. 1
Well-suited to sheet thicknesses of 0.8 - 1.5 mm. You can choose between five different dies depending on the material thicknesses: 1, 2, 2+, 3- or 3.
1 unit
0111969
Plate
1 unit
1884876
18V LiHD 4.0Ah rechargeable battery
1 unit
2598811
Plate for channels
1 unit
0243189
18V starter kit
1x LG 12V-36V recharger / 2x 18V LiHD 4.0 Ah rechargeable battery
1 Set (DE)
2598816
1 Set (GB)
2598820
1 Set (USA)
2598818
Spring element
1 unit
0249303
Disc spring
1 unit
0030678
Lubricating grease G1
900 g
0139440
Die arm fixed No. 2+
Well-suited to sheet thicknesses of 2.1 - 2.5 mm. Can be selected with die No. 1, 2, 2+, 3- or 3.
1 unit
0129763
Punching and nibbling oil for steel
500 ml
0103387
Die arm fixed No. 3
Well-suited to sheet thicknesses of 3.1 - 3.5 mm. Can be selected with die No. 1, 2, 2+, 3- or 3.
1 unit
0118132
Punching and nibbling oil for aluminium
1000 ml
0125874
Slewing ring
For hanging up the machine on a balancer. Enables fatigue-free work with maximum movement.
1 unit
0976671
Tilting arm for die No. 1
Well-suited to sheet thicknesses of 0.8 - 1.5 mm. Can be selected with die No. 1, 2, 2+, 3- or 3.
1 unit
0128792
Power-Head Technology
The light metal gear head's ingenious design is specially adapted to the low voltage battery technology. Decoupling the motor pinion from the motor minimises energy loss and ensures even higher performance per battery charge.
Brushless motor
The powerful BL motor generates higher torques than conventional motors, requires less power and generates hardly any heat. This positively affects battery performance and means you get the maximum from every battery charge. A further advantage is the practically limitless service life of a BL motor due to the absence of carbon brushes and therefore no mechanical wear. This means almost wear-free and maintenance-free motors.
Compact and powerful
The 18V rechargeable battery tool has a lightweight design enabling fatigue-free working. The soft grip ensures safe and low-vibration working. All TRUMPF rechargeable battery tools are also available as stand-alone versions, i.e. without rechargeable batteries and charger. If you already have CAS batteries available, you then have the option to save on resources and cut costs.
Optimal working speed
You can use the speed controller to adjust the working speed to suit the individual cutting task. It is extremely efficient if you work in accordance with the predefined cutting lines or a template. It is also well-suited to frequent processing of radii and stainless steel. The electronic overload protection offers yet another notable benefit.
Straight to the point
With displacement joining, the sheets of metal to be joined are placed on top of each other. Then the tool cuts a strip into the sheets in a combined punching and forming operation. The top sheet is joined with the lower one with a form-fitting and corrosion-resistant connection as the materials flow into one another. The connection point solidifies and you get a permanent connection without the need for filler materials or heat.
No connecting elements
The rectangular joining point appears as a shallow raised spot. This means that you have no interference contour, such as with edges for example, which you find with screws and rivets. The simple handling offers the benefit that no connecting elements need to be provided and the machine is therefore quickly ready for use. The TruTool TF 350 can also be adapted to the desired application quickly and easily. Simply choose the relevant tool.
|
TruTool TF 350 LiHD 18V rechargeable battery
|
|
|---|---|
| Maximum sheet thicknesses | |
| Maximum sheet thickness, steel 400 N/mm² | 3.5 mm |
| Maximum sheet thickness, steel 600 N/mm² | 2.5 mm |
| Maximum sheet thickness, aluminium up to 250 N/mm² | 4 mm |
| General | |
| Minimum sheet thickness | 0.8 mm |
| Maximum joining force | 25 kN |
| Maximum stroke rate | 2 1/s |
| Minimum edge spacing | 8 mm - 58 mm |
| Maximum flange height (B) | 36 mm |
| Voltage | 18 V |
| Dimensions | |
| Length | 454 mm |
| Height | 358 mm |
| Weight | |
| Weight (incl. rechargeable battery) | 8 kg |
PDF <1MB
Technical data sheet
The technical data of all product versions as a download.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.
Contact
Services
