Country/region and language selection
TruMicro Serie 6000, product image
TruMicro Serie 6000, product image
Short and ultra-short pulse lasers

TruMicro Series 6000

Powerful, compact, flexible

Satisfying the most demanding requirements, even in series

Thanks to slab technology, the ultrashort pulse lasers of the TruMicro Series 6000 generate laser pulses which can be linearly amplified to very high pulse energies. As the parameters can be selected with great flexibility, even demanding processes can be ideally implemented. Smoothly implement the high-quality and stable lasers of the TruMicro Series 6000 in your batch production, for example in Consumer Electronics, to cut glass or separate flexible printed circuit boards.

Flexibility of parameters

Individually combine demanding parameters such as high pulse energies with ultrashort pulse duration.

High capacity

The ultrashort pulse lasers generate high average power due to high pulse energies.

Wide range of materials

Whether IR, green or UV – selecting the correct wavelength means the most varied of materials can be processed in the best possible way.

Excellent quality

With the TruMicro Series 6000, you will receive industrial, high-quality series products based on established components.

High process stability

The internal power control ensures stable output parameters and a homogeneous process result.

Highly dynamic cutting with TOP Cleave
TruMicro application image, thick glass

Glass modification

Extreme thicknesses greater than 10 mm can be efficiently processed and then cut with TRUMPF TruMicro lasers and TOP Cleave optics. After cutting, it is not necessary to post-process the cutting edge, such as by grinding or polishing.

TruMicro application image, copper comb

Cutting copper foil

The finest structures to the dimension order of micrometers can be cut precisely with a minimal heat-affected zone. This is true even for materials with high reflectivity such as copper alloys.

TruMicro application image, organic material

Cutting organic material

The combination of ultrashort durations with high intensity enables microprocessing with incomparable precision. Even highly sensitive organic material can be cut without damaged or burned edges.

Ablation of gold and ceramics

Ablation of gold and ceramics

The TruMicro 6020 cuts and processes technical high-performance ceramics for performance electronics and consumer electronics. Precise ablation creates conductor tracks and eliminates the need for etching processes, representing a step forward in terms of environmental protection.

Cutting printed circuit boards

Cutting printed circuit boards

The use of the green wavelength enables the processing of flexible printed circuit boards (FPC) for the electronics industry and medical technology. The laser guarantees fast and precise cutting without producing a heat-affected zone. Optimal edge quality is attained, even when working with plastics.

Cutting wood

Cutting wood

The TruMicro 6220 cuts wood with precision. Thanks to advanced ultra-short pulse technology, organic materials can be processed without leaving any residue.

TruMicro 6020
TruMicro 6220
TruMicro 6320
Laser parameters      
Average output power 200 W 100 W 30 W (< 500 fs) or
50 W (< 850 fs)
Beam quality (M²) < 1.3 , optional  M² < 1.2 < 1.3 , optional < 1,2 < 1.3 , optional < 1.2
Wavelength 1030 nm 515 nm 343 nm
Pulse duration < 850 fs or < 850 fs < 500 fs or
Maximum pulse energy 200 µJ for 1 MHz or
2 mJ with 100 kHz
100 µJ bei 1000 kHz 37.5 µJ at 800 kHz (30 W)
50 µJ at 1 MHz (50 W) 
Maximum repetition rate 50000 kHz QCW mode 2000 kHz 2000 kHz
Structural design      
Dimensions of laser head (W x H x D) 600 mm x 366 mm x 735 mm 600 mm x 366 mm x 735 mm 600 mm x 366 mm x 735 mm
Dimensions of supply unit (W x H x D) 446 mm x 915 mm x 725 mm 446 mm x 915 mm x 725 mm 446 mm x 915 mm x 725 mm
Installation      
Ambient temperature 15 °C - 35 °C 15 °C - 35 °C 15 °C - 35 °C

TruControl

TruControl is the quick and easy-to-use control for TRUMPF solid-state lasers. It regulates the laser power in real time in order to deliver reproducible results. TruControl manages, controls and visualises the interface configuration. You benefit from a uniform control architecture across all laser technologies. The lasers have interfaces to control intelligent TRUMPF optics, such as monitored CFO focusing optics or PFO scanner optics. You can program the processing optics easily using the laser control system. The remote support service provided by TRUMPF means that you receive off-site support within seconds. This will allow you to avoid service calls or be as prepared as possible and increase the availability of the laser device.

Advanced Pulse on Demand

The precise time definition of the individual laser pulses is relevant for an optimum process result. The exact time and pulse energy per individual pulse can be set due to the linear slab amplification. Particularly in combination with a scanner, this function can provide equidistant pulses on the workpiece even in the case of acceleration or deceleration.

Remote Services

In the event of a fault, TRUMPF service experts will remotely access your laser via a secure remote connection. In many cases the fault can be remedied directly in this way, or the configuration of the laser can be modified in a way that permits you to continue manufacturing until the spare part arrives.

Interface variety – for simple integration

Interfaces are key for the integration of a TruMicro laser in your machine or production line. The solid-state lasers from TRUMPF offer interfaces to all common fieldbus systems. Also available: real-time interface, parallel digital I/O, interface for process sensor systems, OPC UA software interface, analogue input board, interface for intelligent TRUMPF optics (CFO, PFO).

TOP Cleave cutting optics

The TOP Cleave-2 focusing optics are processing optics for high-dynamic cutting of transparent materials, such as glass or sapphire.

TOP Cleave optics, high-speed laser cutting of glass
TOP Cleave

High-speed laser cutting of glass

TOP Weld processing optics

The innovative processing optics for welding transparent materials without intermediate layers.

TOP Weld

Welding glass or glass to metal without intermediate layers.

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

Find the right pulsed laser for you!

Use the product finder to discover which pulsed laser is best suited to your application!

Start product finder

You may also find these topics interesting

Process optimisation
Application consultation

You can broaden your knowledge and optimise your processes with an application consultation from TRUMPF.

Image of the technology inside scientific lasers
Scientific lasers

TRUMPF Scientific Lasers develops bespoke, innovative solutions of the highest possible quality. They are mainly used for research purposes.

Microprocessing with TRUMPF products
Microprocessing

In micro-production, short-pulse lasers are used wherever controlled, highly accurate and reproducible processing is required.

Contact
TRUMPF Ltd.
Fax +44 1582 399260
Email
Services
Training courses Find out more Technical Service Find out more Spare parts Find out more Process optimisation Find out more Monitoring and analysis Find out more Product enhancements Find out more Service agreements Find out more
Downloads
Service & contact